Our Assests
1 SeT
Seismic Share wave logger (Olsan instrument, USA)
From these equipment, parameters, such as Poisson’s ratios and moduli, can be easily adetermined. These dynamic soil and rock properties are often utilized for earthquake design analyses necessary for certain structures, liquefaction potential studies, site development, and dynamic machine foundation design
1 Set
Pressure Meter (OYO Elastometer-2, Japan)
It is indispensable for designing the foundation for the construction of large scale structures such as buildings, dams or bridges to grasp the characteristics of deformation under a certain stress. The Elastmeter-2 is new version of lateral load tester capable of testing wide range ground from soft rock to hard rock.
2 SeTs
Earth Resistivity meter-4 pole (ACME USA)
We pioneered the use of clamp-on ground resistance testing and we regularly review and improve the features of our instruments so you can expect AEMC ground resistance testers to be the highest quality, the most complete package, and the simplest way to learn about and ensure ground integrity.
2 Sets
Plate Load Test
Pile Load test equipments comprises of I-beam, hydraulic jack, hydraulic pump, pressure gauge, dial gauge, kentledge weight, base plate, reference beam, magnet
1 SeT
Pile Driving Analysis/ Dynamic Load Test, Netherlands
High strain dynamic load testing and pile driving monitoring system. Perform dynamic load testing on most types of deep foundations.
1 Set
GPR (Ground Penetration Radar) OPERA DUA, Italy
The data stored in the iPad was analyzed using post processing software supplied by Proceq. The heart of the GPR surveying is always its antenna, which essentially comprises of a source transmitter and receiver. development, and dynamic machine foundation design
Pile integrity test or low strain dynamic test (PIT)
The PIT test consists of attaching one or two accelerometers to the foundation and using a hand-held hammer to impact it. The PIT collects the acceleration data and displays curves that reveal any significant changes in cross section that may exist along the shaft soft rock to hard rock.
Compression Testing Machine
Compression Testing Machine (CTM) is used to measure the compressive strength of a material. The CTM is designed to apply a compressive load to the sample until it fails. The machine consists of a piston that moves up and down inside a cylinder, applying the load to the sample.
2 SeTs
Field vane share
The shear vane test is a method of measuring the undrained shear strength of a cohesive soil. The test is carried out with equipment consisting of a rod with vanes mounted to it that is inserted into the ground and rotated.
8 Sets
Auto Hammer(SPT)
Auto SPT drop hammer that is hydraulically powered and entirely automated. The hammer produces a reliable and precise blow count using a 140 lbs driving force (slug) dropped from 76 cm, 760mm Adjustable. Both a swing-arm mounted variant and a solo winch line device are offered for the hammer
1 SeT
Core Cutter HILTI D120
Extremely compact, light and mobile diamond coring machine for rig-based concrete coring from 16-162 mm (5/8 - 6-3/8) in diameter.
1 Set
Triaxial Shear Test ( Model-VJT 5135 with automatic pressure controller VJT-2266)
Triaxial testing of soils provides valuable soil strength and shear information for safe and effective design and construction of embankments and foundation systems. Build the optimum system for your application by selecting from Gilson’s Load Frames manufactured by Karol-Warner, Master and Auxiliary Control Panels, quality Test Cells, and test accessories.
Rotary Drilling Machine (Model-XY200)
This hydraulic water well drilling rig is mainly used for water well, geological general investigation and exploration, kinds of hole in concrete structure, road and tall building foundation exploration, river levees, subgrade grouting hole drilling and direct grouting, civil wells and earth temperature central air conditioner etc.
Electronic Total Station
This is an electronic/optical instrument used for surveying and building construction. It is an electronic transit theodolite integrated with electronic distance measurement (EDM) to measure both vertical and horizontal angles and the slope distance from the instrument to a particular point, and an on-board computer to collect data and perform triangulation calculations.
2 Nos.
Digital level (Sokkia SDL30)
The SDL30 digital level makes quick work of measuring height and distance in all types of environments—from low light to bright sunlight and artificial light. It provides unwavering accuracy in the field even in adverse environments such as tunnels, heat shimmer, and vibration. Its large internal memory, digital display, and simple operation ensure fast and accurate measurements.
Echo sounder: Odom Echotrac MIKE-III
Unique Group offers the Teledyne Odom Echotrac 3200 MKIII which gives you the choice of either a high resolution thermal paper recorder or a full-sized colour LCD chart in interchangeable module format. Both high and low channels feature frequency agility, enabling the operator to precisely match the transceiver to almost any existing transducer
Hemisphere AtlasLink DGPS
AtlasLink is a multi-GNSS, multi-frequency smart antenna preconfigured to receive corrections from Hemisphere’s Atlas global corrections service. AtlasLink paired with Atlas provides you with the easiest way to receive Atlas corrections via the industry’s most powerful multipurpose GNSS smart antenna, either directly from AtlasLink or into your existing receiver.
200 kN CPT Penetrometer Pusher
Truly robust crawler-based CPT penetrometer pushing rig with rubber tracks, with Hat 3-cylinder diesel engine incorporated in a sound insulating enclosure, load-sensing hydraulic pump, a 200 kN CPT penetrom-eter pusher, unique anchoring system on reaction arm.Practically all functionalities are controlled by means of a wireless remote control. It is made of the highest quality components available and built to last.
