Engineering Excellence: Our Technical Edge
As a geotechnical engineering firm, our core strengths lie in our technical capabilities, advanced technology, and experienced workforce. Our mission is to pave the way for safe and sustainable infrastructure by extracting precise data from deep within the earth. Our key assets are highlighted below:
1. Pressure Meter (OYO Elastometer-2, Japan) 1 set
It is indispensable for designing the
foundation for the construction of
large scale structures such as
buildings, dams or bridges to grasp
the characteristics of deformation
under a certain stress. The
Elastmeter-2 is new version of
lateral load tester capable of
testing wide range ground from
soft rock to hard rock.
2. Seismic Share wave logger (Olsan instrument, USA)1 set
From these equipment,
parameters, such as Poisson’s
ratios and moduli, can be
easily determined. These
dynamic soil and rock
properties are often utilized for
earthquake design analyses
necessary for certain
structures, liquefaction
potential studies, site
development, and dynamic
machine foundation design
3. Earth Resistivity meter-4 pole (ACME USA) 2 sets
- We pioneered the use of clamp-on
ground resistance testing and we
regularly review and improve the
features of our instruments so you
can expect AEMC ground resistance
testers to be the highest quality, the
most complete package, and the
simplest way to learn about and
ensure ground integrity.
4. Plate Load Test -2 set
Pile Load test equipments
comprises of I-beam, hydraulic
jack, hydraulic pump, pressure
gauge, dial gauge, kentledge
weight, base plate, reference
beam, magnet
5. Pile Driving Analysis/ Dynamic Load Test, Netherlands 1 set
High strain dynamic load testing
and pile driving monitoring system.
Perform dynamic load testing on
most types of deep foundations.
6. GPR (Ground Penetration Radar) OPERA DUA, Italy 1 Set
The data stored in the iPad was
analyzed using post processing
software supplied by Proceq. The
heart of the GPR surveying is
always its antenna, which
essentially comprises of a source
transmitter and receiver.
development, and dynamic
machine foundation design
7. Pile integrity test or low strain dynamic test (PIT)
The PIT test consists of
attaching one or two
accelerometers to the foundation
and using a hand-held hammer to
impact it. The PIT collects the
acceleration data and displays
curves that reveal any significant
changes in cross section that may
exist along the shaft.soft rock to
hard rock.
8. Compression Testing Machine
Compression Testing Machine
(CTM) is used to measure the
compressive strength of a
material. The CTM is designed
to apply a compressive load to
the sample until it fails. The
machine consists of a piston
that moves up and down inside
a cylinder, applying the load to
the sample.
9. Field vane share 2 set
The shear vane test is a method of
measuring the undrained shear
strength of a cohesive soil. The test
is carried out with equipment
consisting of a rod with vanes
mounted to it that is inserted into
the ground and rotated.
10. Auto Hammer(SPT) 8 sets
Auto SPT drop hammer that is hydraulically
powered and entirely automated. The
hammer produces a reliable and precise blow
count using a 140 lbs driving force (slug)
dropped from 76 cm, 760mm Adjustable.
Both a swing-arm mounted variant and a solo
winch line device are offered for the hammer
11. Core Cutter HILTI D120 1 set
Extremely compact, light and mobile
diamond coring machine for rig-based
concrete coring from 16-162 mm (5/8 – 6-
3/8) in diameter
12. Triaxial Shear Test ( ModelVJT 5135 with automatic pressure controller VJT-2266) 1set
Triaxial testing of soils provides
valuable soil strength and shear
information for safe and
effective design and
construction of embankments
and foundation systems. Build
the optimum system for your
application by selecting from
Gilson’s Load Frames
manufactured by Karol-Warner,
Master and Auxiliary Control
Panels, quality Test Cells, and
test accessories.
13. Rotary Drilling Machine (Model-XY200)
This hydraulic water well drilling rig
is mainly used for water well,
geological general investigation and
exploration, kinds of hole in
concrete structure, road and tall
building foundation exploration,
river levees, subgrade grouting hole
drilling and direct grouting, civil
wells and earth temperature
central air conditioner etc.
14. Electronic Total Station
This is an electronic/optical
instrument used
for surveying and building
construction. It is an electronic
transit theodolite integrated
with electronic distance
measurement (EDM) to measure
both vertical and horizontal angles
and the slope distance from the
instrument to a particular point,
and an on-board computer to
collect data and
perform triangulation calculations.
15. Digital level (Sokkia SDL30)2 nos.
The SDL30 digital level makes quick
work of measuring height and distance
in all types of environments—from low
light to bright sunlight and artificial
light. It provides unwavering accuracy
in the field even in adverse
environments such as tunnels, heat
shimmer, and vibration. Its large
internal memory, digital display, and
simple operation ensure fast and
accurate measurements.
16. Echo sounder: Odom Echotrac MIKE-III
Unique Group offers the Teledyne
Odom Echotrac 3200 MKIII which
gives you the choice of either a high
resolution thermal paper recorder or
a full-sized colour LCD chart in
interchangeable module format.
Both high and low channels feature
frequency agility, enabling the
operator to precisely match the
transceiver to almost any existing
transducer
17. Hemisphere AtlasLink DGPS
AtlasLink is a multi-GNSS, multifrequency smart antenna
preconfigured to receive
corrections from Hemisphere’s
Atlas global corrections service.
AtlasLink paired with Atlas provides
you with the easiest way to receive
Atlas corrections via the industry’s
most powerful multipurpose GNSS
smart antenna, either directly from
AtlasLink or into your existing
receiver.
18. 200 kN CPT Penetrometer Pusher
Truly robust crawler-based CPT
penetrometer pushing rig with rubber
tracks, with Hat 3-cylinder diesel
engine incorporated in a sound
insulating enclosure, load-sensing
hydraulic pump, a 200 kN CPT
penetrom-eter pusher, unique
anchoring system on reaction
arm.Practically all functionalities are
controlled by means of a wireless
remote control. It is made of the
highest quality components available
and built to last.
